Clear Hearing Logo

 
BATTERY REPLACEMENT - BTE


 

 

 

 

To change the battery in a behind the ear hearing aid you must first open the battery drawer, this is achieved by pulling it downwards with your fingernail. The old battery can then be dropped or pushed out.

The most common type of battery these days is the Zinc-Air type, which needs to have the coloured insulation tab removed before inserting into the aid.

The battery is then gently pushed into the compartment. The slightly raised side of the battery should always go into the compartment first.

The battery drawer should then be gently closed, if it doesn’t close easily check the placement of the battery. DO NOT FORCE THE DRAWER CLOSED.

Most behind the ear hearing aids have on/off type switches, these can either move up and down, or from side to side to function. Look closely at your hearing aid, “ O “ means OFF, “ M “ means ON, “ T “ usually represents a telephone pick up, (this is not an off position). The Hearing aid should always be put in the “ O “ position when not being worn. The volume control “rolls” upwards ( towards the sky ) for LOUDER and downwards (towards the ground) for SOFTER. Some other types of aids have other types of controls and switches, if you are not sure of there function contact your hearing aid specialist.

TOP of PAGE

 

Web design by Maroochy Megabytes